The Self Canceling Turn Signal Module™ is an electronic flashing relay that is meant to completely replace your existing mechanical flashing relay(s), or be a stand alone flashing relay for vehicles that do not have turn signals. It works with both LEDs or incandescent lights up to 10 amps per output (20 Amps Max). This module does not require any load equalizers because it is a self-timed electronic relay.
Please Note: The Self Cancelling Turn Signal Module™ requires momentary push buttons to operate (not included). Latching-type switches or push to cancel type switches will not work properly because these types of switches send constant power to your turn signals when on and will defeat the main purpose of the self cancelling feature.
- No flasher relay needed
- 3 user selected flash periods
- Automatically self-cancels
- Works with LEDs and incandescent
- Hazard flasher feature built in
- Waterproof and heat resistant
Turn Signal Modes
Mode 1 : Press turn signal button for 1 second, turn signal light will flash for 7 seconds, then self cancel. This mode is usually used when changing lanes.
Mode 2 : Press turn signal button for 2 seconds, turn signal light will flash for 20 seconds, then self cancel. This mode is usually used when slowing down to go around a corner.
Mode 3 : Press turn signal button for 4 seconds, turn signal light will flash for 75 seconds, then self cancel. This mode is usually used when stopping at a signal light and turn will be made after stopping.
Note: All three modes above can be cancelled by pressing the same turn signal button a second time.
Mode 4 : Hazard Mode - is available all the time and will flash until cancelled. To engage, depress both the left and right turn signal buttons for 1 second. To cancel, depress both buttons again for one second.