By categories

Shield Stripz Windshield Trim with Turn Signals

Price: $99.99  
Shield Stripz

Shield Stripz Windshield Trim with Turn Signals

Price: $99.99  
Add to wishlist

An add-on motorcycle windshield light that can be set up as an extra running light or wired in to work with the turn signals. 

Available with Amber or White (shown) LEDs behind a Clear or Smoked lens. Designed to mount on an H-D batwing fairing or comparable motorcycle fairing. LED strip is separated at the middle so you can wire left and right side turn signals separately. Flexible so they can be mounted to just about any surface. The possibilities are endless. Use our Solar Circuits or Dual Element Circuits to make them function as both auxiliary turn signals and running lights.

Running AND Turn Function:
- Can be used as full intensity running lights and blinking on/off turn signals by adding Solar Circuits
- Can be used as 1/2 intensity running lights and full intensity turn signals by adding Dual Element Circuits

  • Choose Clear or Smoked lens
  • Super bright Amber or White LEDs
  • 132 LEDs per strip spaced only 2mm apart
  • 120 degree viewing angle for wider visibility
  • Flexible "D" channel tube that is only .325" thick by .325" wide
  • Approximately 21-5/8" long
  • Industrial strength double side mounting tape on back
  • 24 gauge teflon coated wire leads that are 2 feet long
  • Input voltage of 12-15 Volts DC

Universal for 12V DC Systems
Designed to mount on a H-D batwing fairing or comparable motorcycle fairing

- 3 wire 12VDC hook-up: Ground, Left side power, Right side power
- Installs easily with supplied double sided 3M tape (attached to back of fixture at factory)
- Must be warmed prior to install for proper bending

*A Load Equalizer may be needed to control the turn signal flash rate when switching to LEDs